We make these 2U (3.5 inch) rack panels for every variety of Uniden scanner (scanner not included); the one shown is specific to the BC796 which is 2.94" tall by 7.04" wide. They can be made special for you as a single unit with a speaker and we can also optionally add on a small tray-mounted AC power supply to run 1 or 2 of them (in options). SINGLE UNIDEN BC796N WITH SPEAKER. This rack mount was designed for the SINGLE BC796N and similarly sized units with a speaker, please check your scanner dimensions against our JPG drawings carefully. We make these for every variety of Uniden scanner in 2U rack mounting; the one shown is specific to the BC796 which is 2.94" tall by 7.04" wide.If you have any questions please ASK! The panels are EIA standard 19 width but are also available on special order in 23 inch (actually any width). Any panel can made special for you as a single unit with most any other radio and we can also optionally add on a small tray-mounted AC power supply to run 1 or 2 of them, please ASK. We also have a rack mount for four scanners, please ASK.
We have other rack mounts that work on the BC536/ BCT-15 and BCD996P2 as well, check that listing please. Look at the JPG image file for size specs and we send these out with a hold-down simple bracket & bumpers to set it into the middle of the aperture OR we can supply 90 degree "L" brackets if you have the factory mounting threaded holes let us know. We also have corner brackets that tie the rack shelf to the rack panel, available in options.
Novexcomm makes standard and custom rack mounts for any need and almost any radio. We do rack mounts and Go-Boxes your way!Use any search engine and connect with us, 10 a. We can make panels for most anything here at Novexcomm - We have it all and if we don't we can custom make if for YOU! If you have any special needs like portable (Go-Box) or mobile operation be sure to give us a call first to discuss how we can make it work for you. Our rack panels are made from 0.125 (1/8 inch) aluminum, have a semi-gloss (satin) black baked finish and are made in the USA! We can't afford to have a sample of every radio ever made sitting around here just for photos so many of our images are Photoshopped. Some of them aren't even of the right radio; in some cases we put a photo of a similar radio there just to give you an idea of what our rack panel will look like when you mount your radio into it. The item "2U RACK MOUNT Single With Speaker UNIDEN BC796 OR Dual UNIDEN BC796 With Options" is in sale since Wednesday, November 20, 2019. This item is in the category "Consumer Electronics\Radio Communication\Parts & Accessories\Mounts". The seller is "novexcomm" and is located in Torrance, California. This item can be shipped worldwide.