Rack Mount Single

2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker


2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker
2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker
2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker
2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker
2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker
2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker
2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker
2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker
2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker

2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker    2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker

Listing for single rack mount for Alinco DR135, DR-235, DR435 and other 140mm by 40mm radios With Speaker. This rack mount will work on ALINCO DR135, DR-235, DR435 and other 140mm by 40mm size radios, we can OPTIONALLY make this single or dual radio aperture without speaker of course.

Please notice the corners; we laser-cut them to fit the Alinco corner shape, if your radio is different just let us know. We also have 20 amp and 30 amp supplies available at an increased cost. You will also note the fact we can make you a SINGLE 140x40 mm radio aperture with a speaker AND a Magnetic Mike Clip; so before you make that final decision you may want to discuss how to make it YOUR WAY. Most all of these apertures are set to use the Alinco supplied factory mounting bracket so if you have a different radio just be certain to MEASURE the height of the center bolt holes in the mounting bracket and let us know the measurement of the hole height in the bracket to the table top so we can laser CNC cut the aperture center to fit YOUR bracket. If not let us know! Novexcomm makes standard and custom rack mounts for any need and almost any radio. We do rack mounts and Go-Boxes your way! Use any search engine and connect with us, 10 a. We can make panels for most anything here at Novexcomm - We have it all and if we don't we can custom make if for YOU!

If you have any special needs like portable (Go-Box) or mobile operation be sure to give us a call first to discuss how we can make it work for you. Our rack panels are made from 0.125 (1/8 inch) aluminum, have a semi-gloss (satin) black baked finish and are made in the USA! We can't afford to have a sample of every radio ever made sitting around here just for photos so many of our images are Photoshopped.

Some of them aren't even of the right radio; in some cases we put a photo of a similar radio there just to give you an idea of what our rack panel will look like when you mount your radio into it. The item "2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker" is in sale since Friday, April 22, 2016.

This item is in the category "Consumer Electronics\Radio Communication\Parts & Accessories\Mounts". The seller is "novexcomm" and is located in Torrance, California. This item can be shipped worldwide.


2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker    2U RACK MOUNT for Single ALINCO DR 135/ DR235/ DR435 With Speaker